Double Front Loop Down Loop Transition
One of the advanced level tricks in Kite surfing is the double front loop transition. This is tried by mostly experts or advanced intermediate surfers. The technique here is mostly based on how you balance your forward momentum on the board and then move to height and bring yourself down on the downward wind and this is where you try out the perfect rotation of yourself. So to approach this trick there are couple of steps you need to follow.
First thing you need to do is basically place yourself on the board. This is done with the right leg placed straight on the board with the left leg behind in such a way so that it is used for pushing the board. As the wind speed increases the kite will start to lift you up and this is the point you need to start rotating yourself. Make sure you do not bend the back legs from the board as this basically slows down the entire rotation obstructing the perfect transition. The main idea here is to take you up on the first rotation and slide down in front for a smooth landing but you will notice that by the time you finish the first rotation and shift your head on the other side you are again ready to go for the second time. The next step is here when you and the kite are lifted up and you need to stay at 12 o’clock to the kite all this time by controlling the kite bar with front hand pulling it in forward direction. Every time you jump up the kite should be at 12 o’clock position and this is done when you rotate the body but your feet should be on the board. The impressive part of this is when you are lifted in the air and try to come down it descends slowly and gives you a feel of the kite and its forward movement.
A point to remember here is the kite should be always above you during this time otherwise the downward loop will pull the kite in front and you will be away from it. Always remember that the downloop will be slow and steady so that during this movement it will land you and also has the force to pull you forward. In fact you do not need to make the whole 720° as the downloop which helps in the smooth transitioning to landing also takes care of the turnings. But this is different from kite to kite and it matters on the sizes. For instance if you are using a kite which is slightly larger than the common ones available then make sure the front hand which is over the bar to move in the forward direction to control the high speeds which is controllable with two hands in case the kite is smaller. As you move forward with the wind, you will soon realize that how the kite quickly understands where to downloop and the downwind along with it also assists you in landing your kite.